THINKCAR PROG2
Overview
Accessories
Comparisons
Specifications
FAQ
THINKCAR
PROG2
Advanced Key Fob Programmer and IMMO Tool
Car Key Match
Remote Control Match
Read and write Key Chip Data
– All-in-One Key Programmer –
– Support 1000+ ECU, MCU, EEPROM –
– Expanded EEPROM functions –
– Replace Anti-theft Device Parts –
– Read and write Key Chips –
THINKCAR PROG2 is a powerful car key chip reading and writing anti-theft tool developed by THINKCAR. It’s widely used in automotive electronics industry, auto repair shops, locksmith and professional mechanics.
Repair shops
.png)
.png)
Locksmith
.png)
.png)
Mechanics
.png)
THINKAR PROG2 advanced key and chip programmer is mainly used for reading/writing and learning car keys to the vehicle, it supports 1000+ commonly used ECU, MCU and EEPROM. The PROG2 is compatible with thinkcar advanced diagnostic tools, enables programming of infrared keys for Mercedes vehicles, generating special keys, BMW engine INS code reading, BMW CAS4+/FEM chip reading and writing, etc.
Main Function
THINKCAR PROG2 is mainly used for reading and writing car key chip data, including EEPROM reading and writing, on-board MCU reading and writing, Benz infrared key generation, special key generation, BMW engine ins code reading, BMW cas4 + / FEM chip reading and writing, etc.
EEPROM reading and writing
On-board MCU reading and writing
Benz infrared key generation
Special key generation
BMW engine ins code reading
BMW cas4 + / FEM chip reading and writing
Car Key Programming
THINKCAR PROG2 supports read, copy, write car key data, and other car key related functions. You can use car key programming function to copy the old key data and write into the new key to make the new key.
Gear Box Programming
THINKCAR PROG2 supports Gearbox programming to restore the old gearbox data or replace the old gearbox to write the new data.
Main Features
.png)
Advanced All-in-one key chip/
anti-theft chip read and write.
anti-theft chip read and write.
.png)
Backup and restore IMMO data.
.png)
Support 1000+ common ECU/MCU/ EEPROM.
.png)
Volkswagen’s fourth-generation UDS engine chip read and write.
.png)
Volkswagen/Audi fourth-generation UDS engine replacement (after 2016 year).
.png)
Volkswagen/Audi MQB platform engine/gearbox, dashboard, steering column replacement.
.png)
Audi fourth-generation EZS, comfort computer VW, and KESSY chips replace.
.png)
Audi fifth-generation gearbox ECU replace.
.png)
Volkswagen/Audi dashboard replace without disassembly and lost data (can be directly read from the harness, no need to remove the chip), except 35XX, NEC24c64 14+.
.png)
BMW E, F, G chassis 8HP gearbox data clear.
Supporting List
THINKCAR PROG2 supports common ECU, MCU and EEPROM in the market, which is more than 1,000 brands, and we are continuously updating and extend the coverage.
Support common ECU MCU
Atmel
GI
RenesasM32R
ST
Fujitsu
GigaDevice
Renesas R32C
Renesas V850 UART
Infineon
Grundig
Renesas R8C
Samsung
MC68HC05
HOLTEK
Renesas V850 SPI
SiLabs
MC68HC08
Hynix
MicroChip
MC68HC11
I2C
Nordic
Support common EEPROM
4Wire
ITT
Numonyx
SST
Adesto
KHIC
OKI
ST
AKM
MacroChip
ON Semi
Toshiba
Altera
Micron
Other
Winbond
Amic
MicroWire
PCT
Xicor
Atmel
Mitsubishi
Philips
xUSSR
BOSCH
Motorola
Pioneer
YMC
Catalyst
KHIC
PMC
Spansion
Chingis
MacroChip
Rohm
NEC
EON
Micron
Samsung
NSC
ESMT
MicroWire
Seiko
Ford
EXEL
Mitsubishi
Siemens
Fujitsu
Fairchild
Motorola
Sony
Compatible with THINKTOOL Series
THINKCAR PROG2 is compatible with THINKTOOL MASTER, THINKTOOL MASTER X, THINKTOOL MAX diagnostic equipment.
.png)
THINKTOOL Max
.png)
THINKTOOL X10
.png)
THINKTOOL Master X
.png)
THINKTOOL Master/Master II
Note: The THINKCAR PROG2 will need to be used with THINKTOOL series. The PROG2 is with free software updates for the life of the tool.
.png)
THINKCAR
Diagnostic equipment
Diagnostic equipment
CAR
THINKCARPROG2
Specification
.png)
Car key slot:
place for car key to perform the key matching.
DB26:
connect to the anti-theft wiring harness, such as data line for all lost fourth-generation instrument key.
Benz key infrared slot:
place for Benz infrared key to make key matching.
Car key chip hole:
place for key chip to make key matching.
Status indicator:
power indicator.
DIP slot:
connect the pins of the anti-theft ECU chip through the cable to read and write data.
DC12V :
connection with DC12V power.
DB15:
connect to the main wiring harness.
Working Volt:
12V
Input Currency:
500mA
Working Temperature:
0℃-50℃
Storage Temperature:
-20℃～70℃
Package:
39*107*298mm
EEProm Port:
26PIN, 16PIN
Accessories
Comparisons
Specifications
No Data
FAQ
Insufficient contact of VCI with vehicle OBD port
Please replug the VCI.
Unfix the firmware.
Click “settings” and then “firmware repair” icon to upgrade the firmware.
Bad contact of the VCI
Please reinsert the VCI and try again.
Problem with Bluetooth pairing.
Please cancel the Bluetooth pairing of the diagnostic VCI and re-use the software to automatically pair the VCI.
The diagnostic tablet is left unused for a long time and the battery runs out of power.
Boot by long-pressing the ON/OFF button after 2 hours charging.
Adapter failure.
Please confirm whether the adapter is properly connected to power supply, or the interface contact is in the right place.
No network on the diagnostic tablet.
Check if the diagnostic tablet is connected to good network.
Get prompted that the email address has been signed up.
1. Sign up a new account;2. Retrieve the password and sign in with the original account.
Fail to receive the verification code during sign-up.
1. Check if the email address is correct;
2. Resend a new verification code.
Username or password incorrect.
1. Check if the username or password is correct; 2. Reset your password.
Server failure.
Please try later due to server maintenance.
The device is not connected to Internet
Please confirm whether WiFi network is working normally or network connection is successful.
The serial number and activation code are entered incorrectly
Please check and confirm whether the serial number and activation code are correctly entered (12 digits for serial number and 8 digits for activation code).
Activation code is invalid
Please contact THINKCAR service team or regional sales.
Prompt that the configuration is empty
Please contact THINKCAR service team or regional sale.
When the software is upgraded, it prompts that it is not activated.
The diagnostic VCI may not be activated during registration. Please use the serial number and activation code in the password envelope to activate the device. The operation steps are as follows: Click [Settings]-[VCI Activation], and enter the correct serial number and activation code in the interface, and click [Activate]. If you have any questions, please contact after-sales customer service.
The device is not connected to Internet
Please confirm whether WiFi network is working normally or network connection is successful.
Insufficient storage space
Please uninstall irrelevant applications: select and delete uncommon software in “Software cleaning module” under “Settings” menu.
Server problem
Server under maintenance. Please try again later.
Poor contact of vehicle OBD internal circuit
Please check if OBD pins are all in good conditions.
Vehicle battery heavily loss of electricity
Please recharge of replace the battery.
VCI damage
Please provide proof video to THINKCAR service team for processing.
How to save power?
1）Please sleep the screen，if the tablet isn’t been used. 2)Reduce screen standby time by setting. 3)Reduce the screen brightness by setting.
Where can I purchase a THINKCAR device?
Please contact your local dealers listed in www.thinkcar.com to buy THINKCAR tools.
Can I dis-active my diagnostic tools?
Cancellation of registration is not allowed.If there are any special circumstances, the dealer will submit the SN and application reason to the company to apply, and the dealer will assume that the customer complaint caused by the cancellation of the registration will be assumed by the dealer.
Can the account password be changed?
Modification is not allowed, customers are advised to modify by themselves by retrieving the password
